Part # Rebar Size (Grade 60) SS Mortar per Sleeve (lbs.) Sleeves per Bag SS-5UX #5 0.94 58.8 SS-6UX #6 1.31 42.0 SS-7UX #7 2.06 26.7 SS-8UX #8 2.7 20.4 SS-9UX #9 3.2 17.2 SS-10UX #10 4.01 13.7 SS-11UX #11 5.01 11.0 SS-A11W #11 6.07 9.1 SS-14UX #14 7.67 7.2 Factor in additional 0.25 lbs per sleeve for 5" long inlet and outlet pipes. Factor in additional 15 for waste and field loss.
SS Mortar Packaged in 55 lb. bags Non Metallic, grout, will not stain or rust High Early Strength grout - achieves 4,000 PSI in less than 24 hours at 68 F High flow consistency High Ultimate Strength - exceeds 13,860 PSI in 28 days 35 F to 140 F ambient temperature application (inside sleeve temperature) Fast 2-1/2 minute mixing time (depending on mixing speed) Flowable acceptable range from 8" to 12-1/4" See Splice Sleeve Engineering Sheet for proper mixing instructions
Part # Sleeve Size Fits Part # SS-G56 #5, #6 SS-5UX, SS-6UX SS-G789 #7, #8, #9 SS-7UX, SS-8UX, SS-9UX SS-G10 #10 SS-10UX SS-G11 #11 SS-11UX SS-GA11W #11 SS A11W SS-GRW14 #14 SS-14UX *(1) Grout Washer included with each Splice Sleeve Part # Sleeve Size SS-CS #5-#14
Grout Washer Grout Washers are custom metal washers with a rubber seal designed to prevent the intrusion of bedding mortar into the sleeve for post grout applications or to prevent leakage of SS Mortar out of the sleeve in pre-Grout applications. Coil Spring Coil Springs are designed to support the grout washer tight against the Splice Sleeve during the grouting process.
Washer Bedding Mortar Washer Bedding Mortar
Part # Sleeve Size SS-CSLT #5-#14
Large Taper Spring Large taper springs are a heavy duty spring designed to support the grout washer tight against the Splice Sleeve in Pre-Grout applications.
NMB SPLICE SLEEVE
800.332.7090 email@example.com alpsupply.com Revised 04/2022 135Previous Page