MAGNET

Part # Description Tension Capacity (lbs)* TKSHFM Steel Hole Former Magnet 500 TKHFM Stainless Steel Top Hole Former Magnet 500 TKUHFM Urethane Hole Former Magnet 500 *Above capacities based upon 1-1/2" thick steel, thinner steels will reduce capacities. Thumb Screw sold separately. Petroleum based form release and coatings should not be used with urethane products, as they will degrade the urethane. Urethane products should not be used in temperatures exceeding 180F.

HS W H L BD

Part # Description Tension Capacity (lbs)* L - Length W - Width H - Height HS - Hole Spacing BD - Bolt Diameter TK500TBM 0.5 Ton Button Magnet 1,000 6-11/16" 2-3/8" 1-5/8" 5-1/8" 1/2" TK1TLPBM 1 Ton Button Magnet Low Profile 2,000 13" 3" 1-1/16" 10-9/16" 1/2" TK1TBM 1Ton Button Magnet 2,000 11" 2-3/8" 1-5/8" 9" 5/8" TK2TBM 2.5 Ton Button Magnet 5,200 12-5/8" 4-13/16" 2-1/2" 10-5/8" 5/8" *Above capacities based upon 1-1/2" thick steel, thinner steels will reduce capacities. Part # Description TKTBMLT Button Magnet Removal Tool

Button Magnets Typically used for supporting side rails or blockouts. Push down button engages magnet to steel form, and can be removed using the Button Magnet Removal tool. Optional brackets are also available. Call for further information. Button Magnet Removal Tool Hole Former Magnet

1-1/4" 3/4" 2-3/4" 2-5/32"

THUMB SCREW

Part # Description TKWING Thumb Screw for Hole Former Magnet - 5/16" N.C. 800.332.7090 sales@alpsupply.com alpsupply.com 02/2022 195

FORM ACCESSORIES