QuikLift Split Foot Erection Anchor with Shear Plate

W Ear T L SPL SPW HD SPT N S

The Split Foot Erection Anchor with Shear Plate is designed for horizontal to vertical edge lifting and handling of thin-walled precast elements. The two "ears" on the anchor head prevent the clutch from coming in contact and spalling the concrete. The "ears" transfer the shear loads into the anchor and concrete. The attached shear plate replaces the shear bar, increases shear capacity and reduces minimum panel thickness. A tension bar is typically required to reach the higher tension capacities. Available in 2T, 4T and 8-Ton capacities. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures.

SPLIT FOOT ERECTION ANCHOR WITH SHEAR PLATE LOAD CHART

Anchor Capacity in Concrete

Part # Ton Ring Clutch System Panel Thickness 2.66:1 SWL

*

Shear (lbs) 4:1 SWL Shear (lbs) 4:1 SWL Tension w/o Tension Bar (lbs) 4:1 SWL Tension w/ Tension Bar (lbs) Min. Corner Distance

QL147G 2T

2T-3T (QL001) 3-1/2" min. 2,150 1,430 2,640 4,000 12" 4" 2,932 1,950 3,190 4-1/2" 3,037 2,020 3,550 5" 3,157 2,100 3,900 6" 3,789 2,520 4,000

QL148G 4T

4T-6T (QL002) 4" min. 2,706 1,800 3,400 8,000 15" 4-1/2" 3,714 2,470 3,860 5" 4,000 2,660 4,730 5-1/2" 4,165 2,770 4,970 6" 4,300 2,860 5,170

QL149G 8T

8T-12T (QL003) 7" min. 6,030 4,010 7,100 16,000 18" 7-1/2" 6,030 4,010 7,220 8" 6,030 4,010 7,690

Shaded area indicates the capacity in concrete is limited by the mechanical capacity of the anchor *A shear safety factor of 2.66:1 can be used at the discretion of the engineer for one-time lifts. Table is based on 3,500 psi and 145 PCF concrete. Above capacities are based upon mechanical testing and available industry data. Minimum anchor spacing is double the corner distance for anchors without tension bars

SPLIT FOOT ERECTION ANCHOR WITH SHEAR PLATE DIMENSIONS

Part # Ton Ring Clutch System W - Width L - Length T - Thickness HD - Hole Diameter S - Spread N SPW - Shear Plate Width SPL - Shear Plate Length SPT - Shear Plate Thickness Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs)

QL147G 2T 2T-3T (QL001) 2" 8" 3/8" 5/8" 2-3/4" 1-13/16" 2-1/2" 3" 1/4" 16,000 2.12 QL148G 4T 4T-6T (QL002) 2-1/2" 10-1/2" 5/8" 3/4" 3-3/8" 2-1/2" 2-1/2" 3" 3/8" 32,000 5.06 QL149G 8T 8T-12T (QL003) 3-3/4" 12-13/16" 3/4" 1" 5" 3-1/8" 3" 3-1/2" 3/8" 64,000 10.49

30 L Tension Shear Anchor

Tension Bars provide a simple and economical method to increase tension capacity. (See Tension Bar Selection Chart) 800.332.7090 sales@alpsupply.com alpsupply.com 02/2022 35

QUIKLIFT SYSTEM