2.27" Welded shear bar design minimizes interference with prestressed strand or rebar

Unique design minimizes interference with prestressed strand and reinforcing. Welded shear bar design allows sufficient concrete consolidation under the anchor. QuikLift 6T Forged Erection Anchor with Welded Shear Bar

Ear SBD SBL W QLF548DSBG HD L T N

FORGED ERECTION ANCHOR WITH WELDED SHEAR BAR LOAD CHART

Anchor Capacity in Concrete

Part # Ton Ring Clutch System Panel Thickness 2.66:1 SWL

*

Shear (lbs) 4:1 SWL Shear (lbs) 4:1 SWL Tension w/o Tension Bar (lbs) 4:1 SWL Tension w/ Tension Bar (lbs) Min. Corner Distance

QLF548SBG, QLF548DSBG

6T 4T-6T (QL002) 6" 4,375 2,910 5,150

12,000

16" 8" 6,240 4,150 6,870 12" 7,909 5,260 10,310

Shaded area indicates the capacity in concrete is limited by the mechanical capacity of the anchor *A shear safety factor of 2.66:1 can be used at the discretion of the engineer for one-time lifts. Table is based on 3,500 psi and 145 PCF concrete. Above capacities are based upon mechanical testing, concrete testing, and available industry data.

FORGED ERECTION ANCHOR WITH WELDED SHEAR BAR DIMENSIONS

Part # Ton Ring Clutch System W - Width L - Length T - Thickness HD - Hole Diameter N SBD - Shear Bar Diameter SBL - Shear Bar Length Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs)

QLF548SBG 6T 4T-6T (QL002)

3-5/8" 10-1/2" 5/8" 7/8" 2-1/2" 5/8" 6" 48,000 3.59

QLF548DSBG 6T 4T-6T (QL002)

4-1/8" 10-1/2" 5/8" 7/8" 2-1/2" 5/8" 6" 48,000

4.18

The QuikLift Forged Erection Anchor is designed for horizontal to vertical edge lifting and handling of thin-walled precast elements. The two "ears" on the head of the anchor prevent the ring clutch from coming in contact and spalling the concrete. The "ears" transfer the shear loads into the anchor and concrete. The unique shear bar design of this anchor replaces the standard large shear plate, with a welded shear bar to minimize the interference with prestressed strands or reinforcing. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures.

Also available with a dual shear bar

30 L Tension Shear Anchor

Tension Bars provide a simple and economical method to increase tension capacity. (See Tension Bar Selection Chart) 02/2022 800.332.7090 sales@alpsupply.com alpsupply.com 38

QUIKLIFT SYSTEM

Previous Page
Next Page