QuikLift Split Foot Erection Anchor - 1 Ton

W T Ear L S HD N 30 L L = Overal length of rebar, before bend Tension R Shear Anchor Shear Bar 3/4" Min. Bottom Clearance L D H

SPLIT FOOT ERECTION ANCHOR LOAD CHART

Anchor Capacity in Concrete

Part # Ton Ring Clutch System Min. Panel Thickness 2.66:1 SWL

*

Shear w/ Shear Bar (lbs) 4:1 SWL Shear w/ Shear Bar (lbs) 4:1 SWL Tension w/o Tension Bar (lbs) 4:1 SWL Tension w/ Tension Bar (lbs) Min. Corner Distance

QL046G 1T 1T (QL216CB) 3" 918 611 1,160 2,000 12" Shaded area indicates the capacity in concrete is limited by the mechanical capacity of the anchor *A shear safety factor of 2.66:1 can be used at the discretion of the engineer for one-time lifts. Table is based on 3,500 psi and 145 PCF concrete. Above capacities are based upon mechanical testing and available industry data. A shear bar is required to obtain the shear values shown.

TENSION BAR CHART

Concrete Strength (PSI) Rebar (Grade 60) R - Radius Size L - Overall Length

1,500 #3 35" 1-1/8" 2,000 #3

31"

1-1/8" 2,500 #3

27"

1-1/8" 3,000 #3

25"

1-1/8" 3,500 or greater #3

24"

1-1/8"

QL139G SHEAR BAR CHART

Diameter Height Length

3/8" 1-5/8" 13" QuikLift Shear Bar is required to achieve shear strength shown in chart. Additional shear bar sizes available on page 44.

SPLIT FOOT ERECTION ANCHOR DIMENSIONS

Part # Ton Ring Clutch System W - Width L - Length T - Thickness HD - Hole Diameter S - Spread

N

Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs)

QL046G 1T 1T (QL216CB) 1-3/16" 4-15/16" 1/4" 7/16" 1-3/4" 3/4" 8,000 0.34

The Split Foot 1 Ton Anchor is designed for horizontal to vertical edge lifting and handling of thin-walled precast elements. The single "ear" on the head of the anchor prevents the clutch from coming in contact and spalling the concrete. The "ear" prevents the ring clutch from rotating and hitting the concrete. The shear bar is required to achieve published shear loads with this anchor. A tension bar is required to reach the higher tension capacities. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures.

800.332.7090 sales@alpsupply.com alpsupply.com 02/2022 39

QUIKLIFT SYSTEM