QuikLift Erection Head Anchor

W N Ear L B A HD

The Erection Head Anchor is designed for horizontal to vertical edge lifting and handling of thin-walled precast elements. The two "ears" on the head of the anchor prevent the clutch from coming in contact and spalling the concrete. The "ears" transfer the shear loads into the anchor and concrete. The shear capacities below require a shear bar. A tension bar is required to achieve any tension capacity. Available in 2T, 4T and 8-Ton capacities. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures. Domestic available.

ERECTION HEAD ANCHOR LOAD CHART

Anchor Capacity in Concrete

Part # Ton Ring Clutch System Panel Thickness 2.66:1 SWL

*

Shear w/ Shear Bar (lbs) 4:1 SWL Shear w/ Shear Bar (lbs) 4:1 SWL Tension w/ Tension Bar (lbs) Min. Corner Distance

QL403G 2T 2T-3T (QL001) 4" - 4,000 12" QL075G 4T 4T-6T (QL002) 5-1/2" - 8,000 15" QL185G 8T 8T-12T (QL003) 7-1/2" 6,030 4,010 16,000 18" 8" 6,030 4,010 9" 6,195 4,120 10" 6,436 4,280 11" 6,646 4,420 12" 6,842 4,550 Shaded area indicates the capacity in concrete is limited by the mechanical capacity of the anchor *A shear safety factor of 2.66:1 can be used at the discretion of the engineer for one-time lifts. Table is based on 3,500 psi and 145 PCF concrete. Above capacities are based upon mechanical testing and available industry data. A shear bar is required to obtain the shear values shown

ERECTION HEAD ANCHOR DIMENSIONS

Part # Ton Ring Clutch System W - Width L - Length T - Thickness HD - Hole Diameter A B N Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs)

QL403G 2T 2T-3T (QL001) 2" 4-1/4" 3/8" 5/8" 2-3/8" 1-3/32" 1-13/16" 16,000

0.72

QL075G 4T 4T-6T (QL002) 2-1/2" 7-7/16" 5/8" 3/4" 3-3/16" 1-1/4" 2-1/2" 32,000

2.72

QL185G 8T 8T-12T (QL003) 3-3/4" 13-1/4" 3/4" 1" 4" 1-3/4" 3-1/8" 64,000

9.23 30 L Tension Shear Shear Bar Anchor 3/4" Min. Bottom Clearance

QuikLift Shear Bar is required to achieve shear strength shown in chart. Tension Bars are required to be used for Erection Head Anchors to achieve tension values shown in chart. Erection Head Anchors have no foot to achieve tension values without a tension bar. 2T 4T 8T 02/2022 800.332.7090 sales@alpsupply.com alpsupply.com 40

QUIKLIFT SYSTEM