QuikLift Forged Insulated Panel Anchors

B A L SL SW T W

FORGED INSULATED PANEL ANCHOR INFORMATION

Part # Ton Ring Clutch System W - Width L - Length T - Thickness A B SL - Slot Length SW - Slot Width Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs) QLFIP6T7G 6T 4T-6T (QL002) 7" 3-15/16" 5/8" 2-3/4" 5-3/8" 1-3/16" 13/16" 48,000 2.63 QLFIP9T534G 9T 8T-12T (QL003) 5-3/4" 4-3/16" 3/4" 2-3/4" 3-3/4" 1-1/2" 15/16" 72,000 3.17 QLFIP12T7G 12T 8T-12T (QL003) 7" 4-13/16" 3/4" 3-3/16" 5" 1-13/16" 1-1/8" 96,000 4.06 QLFIP12T8G 12T 8T-12T (QL003) 8" 5" 3/4" 3-7/16" 6" 1-13/16" 1-1/8" 96,000 4.89

The QuikLift Forged Insulated Panel Anchor is specifically designed to edge-lift insulated panels efficiently and economically. The anchor spans the insulation and connects the exterior and interior wythes, distributing the shear and tension loads through the added reinforcement. The anchor has a very small profile, minimizing the disruption of the insulation during installation. The anchor supports each wythe during the erection process, decreasing the shear stress on the insulated panel tie system. Reinforcement is required as shown in the details below. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures.

ANCHOR INSTALLATION DETAILS

Part # Ton W - Width PT - Panel Thickness BW - Bottom Wythe IT - Insulation Thickness TW - Top Wythe ICB ICT CC - Concrete Cover* QLFIP6T7G 6T 7" 8" 2" 4" 2" 7/16" 7/16" 1/2" 9" 3" 15/16" 15/16" 1" QLFIP9T534G 9T 5-3/4" 8" 3" 2" 3" 9/16" 9/16" 1-1/8" QLFIP12T7G 12T 7" 9" 3" 5/8" 1" QLFIP12T8G 12T 8" 10" 3" 4" 3" 5/8" 1" * Minimum of 1/2" cover required on top and bottom of anchor

W CC TW ICT Shear Bar Tension Bar ICB BW IT PT CC Concrete Insulation

Shear Parallel to Panel Thickness Shear Perpendicular to Panel Thickness Tension 800.332.7090 sales@alpsupply.com alpsupply.com 48

QUIKLIFT SYSTEM

Revised 03/2022