QuikLift Spread Anchors Spread Anchors are designed for back-stripping and edge lifting in thicker panels, these versatile anchors are commonly used in slabs/panels due to the capacities and low cost. By maintaining the minimum edge distances (1.5 x anchor length) these anchors can handle shear loads equal to the tension loads listed when installed in the face of concrete. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures. QuikLift 1 Ton L-Anchor

L A W Spread T

DIMENSIONS AND LOAD CHART

Anchor Capacity in Concrete 4:1 SWL Part # Ton Ring Clutch System W - Width L - Length T - Thickness Spread A Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs) Unreinforced Shear Load (lbs) Unreinforced Tension Load (lbs) QL050G 1T 2T-3T (QL001) 1-1/4" 4-3/4" 3/16" 2-3/4" - 8,000

0.33

2,000 QL059G 2T 2T-3T (QL001) 1-1/4" 5-1/2" 3/8" 2-3/4" - 16,000

0.75

4,000 QL116G 4T 4T-6T (QL002) 1-1/2" 6-1/4" 5/8" 3-3/8" - 32,000

1.59

5,850 QL119G 8T 8T-12T (QL003) 2-1/2" 11" 3/4" 4-1/2" 5" 64,000

5.50

16,000 QL174G 22T 12.5T-22T (QL004) 3-1/2" 19-5/8" 1-3/16" 6-1/4" 9-7/8" 176,000

21.60

44,000

Table is based on 3,500 psi and 145 PCF concrete. Above capacities are based upon mechanical testing and available industry data. Minimum edge distance is 1.5 x anchor length and minimum distance between adjacent anchors is 3 x anchor length.

DIMENSIONS AND LOAD CHART

Anchor Capacity in Concrete 4:1 SWL Part # Ton Ring Clutch System W - Width L - Length T - Thickness FL - Foot Length Anchor Ultimate Mechanical Load in Tension (lbs) Weight (lbs) Unreinforced Shear Load (lbs) Unreinforced Tension Load (lbs) QL050LG 1T 2T-3T (QL001) 1-1/4" 4" 3/16" 1-7/16" 8,000 0.36 2,000 Table is based on 3,500 psi and 145 PCF concrete. Above capacities are based upon mechanical testing and available industry data. Minimum edge distance is 1.5 x anchor length and minimum distance between adjacent anchors is 3 x anchor length.

1 Ton L-Anchors are designed for back-stripping and edge lifting in thicker panels, these versatile anchors are commonly used in slabs/panels due to the capacities and low cost. By maintaining the minimum edge distances (1.5 x anchor length) these anchors can handle shear loads equal to the tension loads listed when installed in the face of concrete. Standard finish is hot-dipped galvanized. Impact resistant, even in freezing temperatures.

L W FL T

1. Shear loads should be perpendicular to the face of the anchor and center line of recess. 2. Warning: Spalling may occur when pulling in shear parallel to the face of the anchor. This may also lead to overloading the anchor. 2T 1T 4T 8T 22T 800.332.7090 sales@alpsupply.com alpsupply.com 02/2022 53

QUIKLIFT SYSTEM