HOLDING PLATE DIMENSIONS

Part # Works With Recess Member Ring Clutch System L - Length W - Width T - Thickness D - Diameter Weight (lbs) QL160 QL051, QL200, QL061 2T-3T (QL001) 2-3/4" 5/8" 5/32" 3/8" 0.12 QL144 QL062, QL072 4T-6T (QL002) 3-1/4" 1-3/16" 5/32" 3/8" 0.23 QL111 QL121, QL771, QL791, QL063 8T-12T (QL003) 4-7/8" 1-5/8" 5/32" 1/2" 0.48

L D Fixed Wing Nut Adjustable Wing Nut 3/8" Coil Thread 1-7/8"

QuikLift Mounting Hardware

QuikLift Holding Plate

QuikLiftHolding Plates are most commonly used to attach QuikLift Recess Members to the side rail of a form. Holding plates can be nailed or screwed to the form, utilizing the furnished holes in the plate. Holding plates can also be used in wet-setting applications to keep the Recess Member closed and to cover the holes in the back of the Recess Member, keeping them clear of concrete and other debris. Standard finish is plated.

QuikLift Holding Rod

QuikLiftHolding Rods are used to secure the Recess Members to the form. They consist of a coil rod, a fixed wing nut at one end and an adjustable wing nut used to tighten the recess against the form. Standard finish is plated.

D L T W

Lift Covers Lift covers are an injection molded, plastic cosmetic cover, commonly used for covering the recessed pockets created by lifting devices including ALP Lifting Pin and QuikLift Anchors. Lift covers are required to use DAP Dynaflex 230 Caulk or NPC Solar Seal #900 Caulk when being bonded. Nylon Nail-It fasteners are an alternate method of fastening. Two sizes are available to fit 2T-6T anchors and 8T-12T anchors. Standard color is light gray. Other colors made to order.

D A

HOLDING ROD DIMENSIONS

Part # Works With Recess Member Ring Clutch System D - Diameter L - Length Weight (lbs) QL202 QL051, QL200, QL062, QL061, QL072 2T-3T (QL001) 4T-6T (QL002) 3/8" 6" 0.34 QL20212 QL051, QL200, QL062, QL061, QL072 2T-3T (QL001) 4T-6T (QL002) 3/8" 12" 0.45 QL131 QL121, QL166, QL771, QL791, QL063 8T-12T (QL003) 12.5-22T (QL004) 1/2" 6" 0.48

WING NUT

Part # D - Diameter Weight (lbs) LPWN38 3/8" 0.10 Part # Fits Lifter Size Color D - Diameter A - Lip Qty/Ctn Weight (lbs) CVLC6 2T, 4T Light Gray 6" 1/2" 100 0.13 CVLC6B 2T, 4T Beige 6" 1/2" 100 0.13 CVLC6CW 2T, 4T Cream White 6" 1/2" 100 0.13 CVLC818 8T Light Gray 8-1/8" 1-1/8" 100 0.26 CVLC818B 8T Beige 8-1/8" 1-1/8" 100 0.26 CVLC818CW 8T Cream White 8-1/8" 1-1/8" 100 0.26

QUIKLIFT SYSTEM

800.332.7090 sales@alpsupply.com alpsupply.com Revised 12/2022 63