H W WD 9-1/8" Anchor ID Lot # FD

ALP Utility Lift Anchors - .444"/.671" Diameters Anchors available in two wire diameters: .444" and .671". Standard finish is hot-dipped galvanized.

UTILITY LIFT ANCHOR DIMENSIONS

Part # WD - Wire Diameter Anchor Identification Typical Slab Thickness W- Width H - Height FD - Foot Diameter Weight (lbs) LUA44G .444 4/4 4" 5-1/4" 3-1/8" 15/16" 0.45 LUA54G .444 5/4 5" 6" 3-3/4" 15/16" 0.53 LUA64G .444 6/4 6" 7-1/4" 4-3/4" 15/16" 0.59 LUA56G .671 5/6 5" 6-1/4" 3-3/4" 1-5/8" 1.11 LUA66G .671 6/6 6" 7-1/2" 4-3/4" 1-5/8" 1.34 LUA86G .671 8/6 8" 9-3/4" 6-3/4" 1-5/8" 1.81 Allowable Load Zone

UTILITY LIFT ANCHOR LOAD CHART

Part # Slab Min. Thickness Edge Distance 4:1 SWL at 90 Tension (lbs) 4:1 SWL at 90 Shear (lbs) LUA44G 4" 9" 3,200 5,800 LUA54G 5" 10" 3,860 7,710 LUA64G 5-5/8" 12" 4,460 9,460 LUA56G 5" 10" 4,560 8,430 LUA66G 5-5/8" 12" 7,320 15,780 LUA86G 7-5/8" 16" 10,830 18,850 Safe Working Load provides a factor of safety of approximately 4:1. Table is based on 4,000 psi and 145 PCF concrete. Published load capacity cannot be adjusted for higher concrete strength. Above capacities are based upon mechanical testing and available industry data. For use as a pulling iron, higher allowable loads can be determined by the design engineer by selecting the appropriate factor of safety. LUA54G also available with welded-wire clips to attach to mesh. Only available in plain finish. LUA54C 02/2022 800.332.7090 sales@alpsupply.com alpsupply.com 70

UTILITY LIFT SYSTEM