STRAIGHT LOOP COIL INSERT DIMENSIONS AND LOAD CHART
In-Concrete Capacity, 4:1 SWL Part # Bolt Diameter L - Length A B D - Wire Diameter Insert Ultimate Mechanical Load Tension (lbs) Qty/Ctn. Min. Edge Distance Tension (lbs) Shear (lbs) CI16124P 1/2" 4" 1-3/8" 1-5/16" .256" 9,000 120 9" 2,250 2,000 CI16126P 1/2" 6" 1-3/8" 1-7/16" .327" 14,400 100 10" 3,600 3,000 CI16344P 3/4" 4" 1-13/16" 1-11/16" .327" 15,000 100 12" 3,100 2,800 CI16346P 3/4" 6" 1-13/16" 1-7/8" .375" 18,000 50 12" 4,500 4,200 CI1616P 1" 6" 2-5/16" 2-3/16" .375" 18,000 40 12" 4,500 Table is based on 3,000 psi and 145 PCF concrete. Inserts must be set back 1/2" from concrete surface and have sufficient coil penetration by lifting bolt. Above capacities are based upon mechanical testing and available industry data. ALP Supply does not recommend using 1/2" coil inserts for lifting and handling of precast elements. Maintain the minimum spacing between inserts of at least 2 x the edge distance. Coil thread manufactured per ALP specification.
FLARED LOOP COIL INSERT DIMENSIONS AND LOAD CHART
Part # Bolt Diameter L - Length W - Width A B D - Wire Diameter Insert Ultimate Mechanical Load Tension (lbs) Qty/Ctn. CI181212P 1/2" 12" 3-3/4" 1-3/8" 1-7/16" .327" 14,400 30 CI183412P 3/4" 12" 3-3/4" 1-13/16" 1-7/8" .375" 18,000 25 Inserts must be set back 1/2" from concrete surface and have sufficient coil penetration by lifting bolt. Coil thread manufactured per ALP specification.
CI-16: Straight Loop Coil Insert With its simple design and fabrication, the Straight Loop Coil Insert is highly efficient for use as a bolted connection. Standard finish is plated. CI-18: Flared Loop Coil Insert
B A D L B A D L
Standard finish is plated.
02/2022 800.332.7090 sales@alpsupply.com alpsupply.com 90
COIL INSERTS
Previous Page