FLARED THIN SLAB COIL INSERT

In-Concrete Capacity, 4:1 SWL Part # Bolt Diameter H - Height L - Length A D - Wire Diameter Insert Ultimate Mechanical Capacity Qty/Ctn. Min. Edge Distance Min. Corner Distance Tension (lbs) Shear (lbs) CI6312134P 1/2" 1-3/4" 4-11/16" 1-3/8" .256" 8,200 100 6" 1,520 1,090 CI63342516P 3/4" 2-5/16" 5-1/4" 1-13/16" .327" 10,200 40 8" 2,170 1,640 CI6334312P 3/4" 3-1/2" 5-1/4" 1-13/16" .327" 18,000 25 9" 3,570 2,600 CI6312516P 1" 2-5/16" 5-11/16" 2-5/16" .327" 14,200 25 8" 2,460 1,970 CI631412P 1" 4-1/2" 5-11/16" 2-5/16" .327" 25,000 15 12" 5,280 4,000 Table is based on 3,000 psi and 145 PCF concrete. Inserts must be set back 1/2" from concrete surface and have sufficient coil penetration by lifting bolt. Above capacities are based upon mechanical testing and available industry data. ALP Supply does not recommend using 1/2" coil inserts for lifting and handling of precast elements. Maintain a minimum spacing between inserts of at least twice the minimum corner distances. Coil thread manufactured per ALP specification.

CI-63: Flared Thin Slab Coil Insert

D A H L

The Flared Thin Slab Coil Insert is used where panel thickness is limited and offers better tension loads than other thin slab inserts. Standard finish is plated.

A H 15 D B L

THIN SLAB COIL INSERT

In-Concrete Capacity, 4:1 SWL Part # Bolt Diameter H - Height L - Length D - Wire Diameter A B Insert Ultimate Mechanical Capacity Qty/Crate Min. Edge Distance Min. Corner Distance Tension (lbs) Shear (lbs) CI53343P 3/4" 3" 7-1/8" .327" 1-13/16" 3" 18,000 540 8" 12" 2,340 CI5314P 1" 4" 9-3/8" .327" 2-5/16" 4" 25,000 600 10" 15" 3,520 3,460 Table is based on 3,000 psi and 145 PCF concrete. Inserts must be set back 1/2" from concrete surface and have sufficient coil penetration by lifting bolt. Above capacities are based upon mechanical testing and available industry data. Maintain a minimum spacing between inserts of at least twice the minimum corner distances. Coil thread manufactured per ALP specification.

CI-53: Thin Slab Coil Insert The CI-53 Thin Slab Coil Insert is designed for lifting and handling thin precast. Inserts should have 3/4" minimum clearance off the bottom face to obtain the rated loads. Standard finish is plated.

800.332.7090 sales@alpsupply.com alpsupply.com 02/2022 91

COIL INSERTS