FLARED WING FERRULE INSERT DIMENSIONS AND LOAD CHART

In-Concrete Capacity. 3:1 SWL Part # BD - Bolt Diameter Threads per Inch (UNC) H - Height L - Length A D - Wire Diameter Insert Ultimate Mechanical Capacity (lbs) Qty/Ctn Min. Edge Distance Min. Corner Distance Tension (lbs) Shear (lbs) FI6212134P 1/2" 13 1-7/8" 4-1/2" 1-3/8" 0.256" 9,000 100 6" 9" 2,120 FI62342716P 3/4" 10 2-7/16" 5-1/8" 1-5/8" 0.327" 18,000 40 6" 9" 2,960 FI6234358P 3/4" 10 3-5/8" 5-1/8" 1-5/8" 0.327" 18,000 30 9" 14" 4,830 FI6212716P 1" 8 2-7/16" 5-9/16" 1-5/8" 0.327" 18,000 30 6" 9" 3,080 Table is based on 3,000 psi and 145 PCF concrete. Inserts must be set back 1/2" from concrete surface. Above capacities are based upon mechanical testing and available industry data. Minimum spacing of inserts is 2 x (corner distance).

THIN SLAB FERRULE INSERT DIMENSIONS AND LOAD CHART

In-Concrete Capacity, 3:1 SWL Part # BD - Bolt Diameter Threads per Inch (UNC) H - Height L - Length D - Wire Diameter Insert Ultimate Mechanical Capacity (lbs) Qty/Ctn Tension (lbs) FI4414P 1/4" 20 1-1/4" 4" 0.256" 1,350 150 450 FI4412P 1/2" 13 1-3/8" 4" 0.256" 2,700 125 900 FI4458P 5/8" 11 1-5/8" 4" 0.256" 3,000 100 1,000 FI4434P 3/4" 10 1-5/8" 4" 0.256" 4,800 90 1,600 Table is based on 3,000 psi and 145 PCF concrete. Inserts must be set back 1/2" from concrete surface. Safe Working Load is based on 3,000 psi concrete and insert setback 1/2" from the concrete surface. Above capacities are based upon mechanical testing and available industry data.

FI-62: Flared Wing Ferrule Insert FI-44: Thin Slab Ferrule Insert

L D H 1/8" A L D H

The Flared Wing Ferrule Insert is another option for use where panel thickness is limited. Insert available in 1/2", 3/4" and 1" bolt diameters and offers better tension loads than other thin slab inserts. Standard finish is plated. Plated inserts are not designed for use with hot dip galvanized bolts, due to thread engagement. The Thin Slab Ferrule Insert is designed for use where the depth of embedment is limited and where limited capacity is required in tension. Available in 1/4", 1/2", 5/8" and 3/4" sizes. Standard finish is plated. Plated inserts are not designed for use with hot dip galvanized bolts, due to thread engagement.

800.332.7090 sales@alpsupply.com alpsupply.com 02/2022 99

FERRULE INSERTS